Welcome to   JEJA International Corporation Limited
Up lighting and wall lighting factory


Contact Us

You are here:Home >> News >> Company News

Company News

New product--motion sensor + remote controlled light base launched in early August!

Time:2019-08-21 Views:40
Quick Details
motion sensor
Working Temperature(℃):
-10 to 60
Lamp Luminous Flux(lm):
Lamp Luminous Efficiency(lm/w):
Working Lifetime(Hour):
Beam Angle(°):
Input Voltage(V):
CRI (Ra>):
Support Dimmer:
change color and brightness

Packaging & Delivery

Selling Units:
Single item
Single package size: 
12X12X9 cm
Single gross weight:
0.5 kg
Lead Time :
Quantity(Piece) 1 - 100 101 - 1000 >1000
Est. Time(days) 7 15 To be negotiated
Product Description

Key Features: 

1, remote control and motion sensor 2, 13 fixed colors and 5 mode settings 3, 12 superbrigt leds 4, battery and adapter power supplies 5, 4" diameter and 1" height


1,12 SMD5050 RGB leds 2,10cm diameter. 2.3CM height (AAA battery type) 2.7CM height (rechargeable battery type) 3, 13 fixed colors, and 5 mode settings as: fixed color, FADE, JUMP, FLASH and timer. 4, 21-key remote controller, remote range is 8--10 meters. 5, motion sensor works when remote controller turn off the light 6, Motion sensor scale is 120 degrees,3--5 meters 7, Power supply: DC adapter + AAA battery or built-in rechargeable lithium battery 1500 mAh 8, Timer: the light turns off in 30 minutes 9, Flash: press the button FLASH to make the currnt color flash 10, Dimable: decrease the brightness in 4 grades. 11, packaging: 2*lights and 2* remotes in a white box box size: 11*11*7CM 50 boxes in a CTN CTN size: 57*24*37CM

How to use: 

Note: 1, When switch the light on, the lights are white in medium brightness. It will turns off automatically in 30 seconds if there is no motion detected. 2, Remote controller is prior to motion sensor. Only when the remote controller turns off the light or never use the remote controller, does the motion sensor work. 3, The buttons of TIMER ,brightness down and brightness up work only in remote-control mode. User‘s manual 1, Install the batteries correctly or connect the light to the adapter (5V output) 2, Push the switch on the light to ON position to switch the light on. 3, The light will be on white color in medium brightness,the motion sensor works. 4, Keeping moving in the scale of 120 degree 3--5 meters, the light will not turn off. 5, The light will turn off automatically in 30 seconds if no motion is detected. 6, Remove the protective plastic tab from battery compartment on IR remote control before use it. 7, Change colors or mode settings by pressing the buttons on the remote controller while pointing to the face of the light. 8, Press OFF button to switch the control to motion sensor. 9, When press the OFF button, the lights will be on white color if the motion sensor detects motions. 10, When press the OFF button, the lights will be off if the montion sensor detects no motions. 11, To turn the light off by pushing the switch on the lights to the position of OFF. 12, Use an adapter to charge the bettery inside or as power supply, the output of the adapter is 5V. 13, The battery is fully charged when the blue indicator is off. 14, The adapter will not charge the AAA batteries in the battery compartment.